Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Citroen 1.4 HDi fuel filter replacement

Model: Citroen Citroen Various
Part: Diesel fuel filter

In this video tutorial we will see how to remove and replace the diesel filter in the engines of the Citroen and Peugeot group, in particular in the 1.4 HDi. First we open the engine hood and remove the top cover of the air filter box: then we remove the electrical connector of the pressure sensor and unclip the hose located next to it, as shown in the video. At this point we are going to disconnect the pipes of the diesel filter and we are going to unscrew the screws of the bracket that we find at the bottom and remove the old diesel filter replacing it with the new one; then reassemble everything!

Posted on 3 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the timing belt of a 1.6 HDi Peugeot/Citroen engine
How to remove the timing belt of a 1.6 HDi Peugeot/Citroen engine
Citroen Citroen Various In this video we can see how to remove the timing belt of a 1.6 HDi Peugeot/Citroen engine, and where to place the locking points to prevent the engi…
Replacing the oil filter on Citroen C5
Replacing the oil filter on Citroen C5
Citroen Citroen Various We want how to remove the oil filter on a Citroen C5? We lift the front hood and check the engine oil filter where it is stored. We open the car door…
How to replace the clutch of Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
How to replace the clutch of Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
Citroen Citroen Various Today's main steps will show us how to disassemble and replace the clutch of the Citroen Relay 2.2 HDI, as well as the Peugeot Boxer and the Fiat Duc…

Other guides you may be interested in

How to Replace the Front Headlight Bulbs on an Opel Mokka

Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the rubber inspection cap on the back of the headlight and remove it. Disconnect the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Reassemble all previously removed parts (headlight cover cap).

Watch the video!


by ScegliAuto

More videos