Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb on a Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Tail light bulb

Before you begin, open the tailgate of your Citroen C3 Picasso. Start by unscrewing and removing the Torx screws that secure the rear light to the vehicle. This will free the rear light, which you can then remove by disconnecting the rear electrical connector. Once you have removed the rear light from the vehicle, disconnect the blown bulb socket. At this point, you will have access to the blown bulb, which you can then remove, completing the disassembly. To install the new bulb and reattach the rear light, simply follow these instructions in reverse, and you will have completed the replacement.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…
How to Replace the Front Headlamp Bulb on a Citroën C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroën C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) To replace the front headlamp bulb on a Citroën C3 Picasso, lift the bonnet to access the engine compartment. Next, remove the plastic cover protecti…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos