Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulb on the Citroà «n C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Light bulb

In order to replace the headlight bulb of the Citroà «n C3 Picasso it is necessary to lift the hood to gain access to the engine compartment; subsequently, it will be necessary to remove the plastic cap placed to protect the rear part of the light. This will allow you to have access to the bulb: to remove it you will need to loosen a screw. After this has been removed, it will be possible to remove the bulb connected to the connector from its housing. By detaching the bulb from the connector, it will be possible to connect a new one and insert it into the special housing, closing the rear part of the headlight with the relative cap.


Posted on 28 February 2024 by ScegliAuto



How to replace the headlight bulb on the Citroà «n C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) In order to replace the headlight bulb on the Citroà «n C3 Picasso, the hood must be opened to gain access to the engine compartment. Once the hood h
How to replace headlight bulbs on Citroà «n C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the bulbs on the Citroà «n C3 Picasso is very simple thanks to the elevated position of the headlights and the fairly wide access points. I
How do you remove the rear light from the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) To be able to remove the rear light from the Citroën C3 Picasso you have to go and open the tailgate in order to have access to the screws that fix

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos