Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb in the Citroën C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Light bulb

To replace the headlight bulb in the Citroën C3 Picasso, open the bonnet to access the engine compartment. Once the bonnet is open, remove the protective plastic cap located inside the headlamp. After removing the cap, you can pull the bulb out of its housing and disconnect it from its connector. Once the old bulb is removed, connect the new one to its connector and insert it back into the appropriate housing. After the replacement, replace the protective cap and close the bonnet.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlamp bulb of the Citroen C3 Picasso
How to replace the front headlamp bulb of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the front headlamp bulb of the Citroen C3 Picasso is very simple and quick. Open the bonnet and position yourself in front of the headlamp …
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…
How to replace the side turn signal bulb of the Citroen C3 Picasso
How to replace the side turn signal bulb of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) The following video tutorial shows us how to replace the side indicator light bulb on a Citroen C3 Picasso vehicle easily and quickly. To perform thi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos