Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Headlights on a Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

Video tutorial

Let's see how to remove the front headlight of a Citroen C3 Picasso. Open the bonnet and, for safety, disconnect the negative terminal of the battery.

The headlight is secured with 3 main screws and some clips. On the side near the grille, you will find a Torx screw located above the headlight, which you will remove.

On the outer wing, there is a screw located in the wheel arch; if you slightly turn the steering wheel, you will have more space to remove the screw. Finally, beneath the headlight, you will find the third screw (sometimes there are even two) accessible from the engine bay or by slightly loosening the bumper (without removing it). Now you can pull the headlight towards you: there may be a retaining clip at the bottom, which you will release with a flathead screwdriver.

Now, simply disconnect the electrical connectors.


Posted on 14 May 2026 by ScegliAuto


Related tutorials

Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
Citroen C3 Picasso (2008-2017 / MK 1) This video demonstrates how to change the front headlight on a Citroen C3 Picasso: open the front bonnet and remove the two securing bolts that hold …
Citroen C3 Picasso (2008-2017 / MK 1) Hello, today’s objective is to remove the front bumper of your Citroen C3 Picasso. Start by lifting the car with a jack to create enough space to wor…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos