Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel on a Citroën C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Steering wheel

To replace the steering wheel on a Citroën C3 Picasso, loosen the two screws securing the airbag located at the centre of the wheel, positioned at its rear. Once these screws are loosened, you can pull the airbag from its housing, disconnecting the connectors at the back. After the airbag is released, access the central nut that secures the steering wheel to its column. Remove the old steering wheel and fit the new one, securing it with the nut and reinserting the corresponding airbag.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the airbag from the 2009 Citroen C3 Picasso
How to remove the airbag from the 2009 Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) To remove the airbag from the 2009 Citroen C3 Picasso, we must first disconnect the car's battery. This step, although not always described in tutori…
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can make the tyre pressure warning light on the Citroën C3 Picasso disappear by inflating the tyres until they reach the recommended pressure val…
How to Remove the Headlights on a Citroen C3 Picasso?
How to Remove the Headlights on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Let's see how to remove the front headlight of a Citroen C3 Picasso. Open the bonnet and, for safety, disconnect the negative terminal of the battery…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos