Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Tail light bulb

Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next, pull out the light and disconnect the corresponding electrical connector to access the bulb holder. Proceed by unclipping the clips that hold the bulb holder to the light. At this point, you can remove the damaged bulb and successfully complete the disassembly. To install the new bulb on your Citroen C3 Picasso, simply follow these steps in reverse order, and you will have completed the replacement.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulb on a Citroen C3 Picasso
How to Replace the Rear Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before you begin, open the tailgate of your Citroen C3 Picasso. Start by unscrewing and removing the Torx screws that secure the rear light to the ve…
How to replace the bulb of the interior light of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Today we will learn how to disassemble the interior light fixture of the Citroen C3 Picasso, replacing its bulb. First, we climb into the interior an…
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos