Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Control Knob Bulb on a Citroën C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Light bulb

To replace the bulb for the air conditioning control knobs, get inside your Citroën C3 Picasso and remove the centre console. Extract the radio from its housing by unscrewing the locking screws, taking care not to damage the connector by pulling too hard; disconnect the antenna cable and the connector to remove the radio. Remove the drawer located under the radio and access the bulb connectors. Disconnect the connectors from the bulbs and remove them. Insert the new bulbs and reconnect the connectors. Refit the drawer and the radio, close the console, and test the bulbs by starting the vehicle. If they do not work, you may need to replace the related fuse.

Posted on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
How to replace the headlight bulb in the Citroën C3 Picasso?
How to replace the headlight bulb in the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) To replace the headlight bulb in the Citroën C3 Picasso, open the bonnet to access the engine compartment. Once the bonnet is open, remove the protec…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos