|
Do it yourself
| |||
| ||||
How to replace the rear headlight bulb of a Citroen C3 Picasso?
Model: Citroen C3 Picasso
MK 1
- Years 2008-2017
To replace the rear headlight bulb of a Citroen C3 Picasso, proceed as follows. Start by opening the rear hatch to access the rear part of the lamp. You will find a cover panel inside the rear compartment that protects the bulb. Gently remove this cover panel. Once removed, you should see the bulb located inside the bulb holder. Rotate the bulb holder in the indicated direction to unlock it and remove it. Now you can remove the faulty bulb by gently pulling it out of its socket. Make sure to replace it with a compatible bulb of the right type. After inserting the new bulb, reinsert the bulb holder into its housing and rotate it to lock it in place. Reposition the cover panel and make sure it is securely fixed. Close the rear hatch and check that the new bulb is working properly before using the car. Always pay attention during this operation to avoid damaging the bulb or the vehicle.
Posted on 10 December 2024 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3 Picasso
(2008-2017 /
MK 1)
If one of the bulbs in the front headlight of your Citroen C3 Picasso has stopped working and you want to replace it with a new one on your own, then…
Citroen C3 Picasso
(2008-2017 /
MK 1)
Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
Citroen C3 Picasso
(2008-2017 /
MK 1)
Good morning, today we are going to tackle the replacement of the timing belt on our Citroen C3 Picasso. We start by opening the hood and removing th…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.397
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |