Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light of the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Tail light

The following video tutorial will show you the steps to be carried out independently to replace the left rear headlight of a Citroen C3 Picasso when the plastic is damaged. First, we open the trunk of the vehicle and then with a flat-head screwdriver we remove the headlight by leveraging on the internal clips. Being careful with the bulb and the connector, we remove the headlight. We then insert the new headlight into its housing, but first we insert the lamp inside. We mount the headlight and proceed with the test for the operation of the bulb, finally closing the trunk.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
How to Replace the Rear Bulb on a Citroen C3 Picasso
How to Replace the Rear Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before you begin, open the tailgate of your Citroen C3 Picasso. Start by unscrewing and removing the Torx screws that secure the rear light to the ve…
How to Remove the Rear Light on a Citroën C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) To remove the rear light on a Citroën C3 Picasso, open the tailgate to access the screws securing the light. There are two screws, one next to the li…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos