Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the reverse light bulb on the Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Light bulb

In this video, we can see how to change the reverse light bulb on the Citroen C3 Picasso. We need to open the rear hatch, and with a knife blade, or with a screwdriver and cut (or with a plastic spatula, so we are sure not to scratch anything) we lever from the inside on the two hooks that are there to lift the cover of the reverse light. In this way, the transparent plastic part comes off and we can replace the bulb, simply by unscrewing the electrical connector. The YouTuber also attached the reverse camera from this side. A good idea to copy, if you want to do an extra job on our car.

Posted on 18 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Third Brake Light on a Citroen C3 Picasso
How to Change the Third Brake Light on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) To replace the bulb of the third brake light on a Citroen C3 Picasso, open the tailgate and locate the third brake light assembly, positioned high on…
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
How to Replace the Rear Light Bulb on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
How to Replace the Front Headlamp Bulb on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the bonnet of your Citroen C3 Picasso. First, disconnect the connector that powers the blown bulb by pulling it out of its hous…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos