Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Citroen Berlingo battery replacement

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Battery

Open the hood and put on the special support rod. For easy access to the battery, I recommend that you remove the air circuit located near it. Lift the plastic door relative to the positive pole and disconnect it by lifting the lock, as shown in the video. Disconnect the battery cables and remove the top cover by pulling it from the front. Unscrew and then disconnect the negative pole on the back of the battery. Remove the single battery retaining bolt on your left and lift the battery from the handle. Proceed backwards for assembly.

Posted on 10 March 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Citroën Berlingo?
How do you replace the battery of the Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) In order to replace the battery of the Citroën Berlingo, you need to open the hood to access the components located inside the engine compartment: he…
How do you replace the battery of the Citroën Berlingo?
How do you replace the battery of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In order to replace the battery of the Citroën Berlingo, you need to open the hood so that you can access the components located inside the engine co…
What is the Citroen Berlingo fuse scheme?
What is the Citroen Berlingo fuse scheme?
Citroen Berlingo (2008-2018 / MK 2) In this video we can see the diagrams of the fuses, and the position of the boxes, of the Citroen Berlingo 2, useful in the event that a device shows…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos