Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Citroen C3?

Model: Citroen C3 SC - Years 2009-2016
Part:

This guide shows how to reset the tyre pressure warning light on the Citroen C3. The first step is to position the car on a flat and safe surface. With the ignition on, access the service menu using the button on the bottom right of the radio. Navigate to the personalisation and configuration menu by pressing the 'OK' button, and access the parameters definition tab for the vehicle. Go to the 'Drive Assistance' tab and select the tyre pressure reset option. Perform this procedure after ensuring the tyres are at the correct pressure, as specified in the user manual and on the label located on the door.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Citroën C3?
How do you reset the tire pressure warning light on the Citroën C3?
Citroen C3 (2016-2023 / SY, SX) The tire pressure sensor of the Citroën C3 can be reset by inflating the tires until they reach the recommended pressure value: this value will be in…
How do you reset the tire pressure warning light in the Citroen C3?
Citroen C3 (2009-2016 / SC) Punctured or deflated tire, with the relative warning light on the instrument panel of your Citroen C3, car shown in the attached video? The inconven…
How to reset the "Service" light on a Citroen C3?
How to reset the "Service" light on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) Before starting, sit in the driver's seat of your Citroen C3. Begin by pressing and holding the right button located within the instrument cluster. W…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos