Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of a Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Tail light bulb

In this video tutorial, you will see how to replace the rear light bulb of a Citroen C3. The first thing to do is to purchase a new bulb. The next step is to open the boot and open the cover found on the side of the affected light. Disconnect the electrical connector and press the latch, then disengage the connector by pulling it towards you. Once this is done, loosen the plastic nut that secures the light. Unscrew the nut completely, being careful not to drop it behind the trim. Now, remove the rear light by gently shaking it to release the seals. Detach the bulb holder from the light by lifting the tabs. Now you can remove the faulty bulb and replace it with a working one, then reassemble all parts in reverse order.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Indicator Bulb of a Citroen C3
How to Replace the Rear Indicator Bulb of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you start, open the rear hatch of your Citroen C3. Begin by unscrewing and removing the screws securing the rear light. Next, pull the light f…
How to Remove the Rear Light on a Citroen C3
How to Remove the Rear Light on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Is the rear light of your car broken? Here’s how to remove and replace the rear light. Remove the inspection cover located at the side of the boot an…
How to Replace the Bulbs in the Rear Light of a Citroen C3
How to Replace the Bulbs in the Rear Light of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to replace the bulbs in the rear light of a Citroen C3? This is a very simple operation, let’s see how to proceed: open the boot lid, then remove…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos