Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Tail light bulb

In this video tutorial, see how to replace the rear headlamp bulb on a Citroen Xsara Picasso by following these simple steps: first, get into the vehicle, turn off the engine, and pull the handbrake. To prolong the life of the bulbs, avoid touching them with your fingers; if you have, clean them thoroughly before installation. Open the boot lid; unscrew the fasteners of the access cover to reach the bulb. Lift the carpet and remove the inner protection; use a flathead screwdriver to lever the metal tab holding the rear lamp block; once removed, disconnect the electrical connector by pressing the plastic tab. Remove the plate, then replace the bulbs by turning them a quarter turn; insert the new bulbs and refit all parts in reverse order.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light Bulb on Citroen Xsara Picasso
Replacing Rear Light Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today, you will learn how to remove and replace the bulb of the rear light (brake bulb) on a Citroen Xsara Picasso in this short video tutorial. Firs…
Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Replacing Rear Headlamp Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will see how to remove and replace the bulb of the rear headlamp on a Citroen Xsara Picasso. First, open the boot lid and then ope…
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos