Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio from the Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Car stereo

In the following video, we will see the procedure to remove and replace the car radio from the Citroen C4 Grand Picasso. Specifically, the video shows a 2008 Citroen, but the procedure is very similar for other car models as well. You need to unscrew the screws located at the two upper ends of the radio using a screwdriver. Once this step is complete, you can pull the radio out of the dashboard, and the job is done. At this point, simply insert a new car radio and then screw the screws back in. Additionally, the video also shows how to remove the outer part of the ventilation system on the dashboard.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Radio on a Citroen C4 Grand Picasso
Removing and Replacing the Radio on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this brief guide, you will find instructions to remove and replace the radio and the standard multimedia system of the Citroen C4 Grand Picasso. F…
How to Remove the Centre Console and Radio on a Citroen C4 Grand Picasso
How to Remove the Centre Console and Radio on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will find the necessary instructions to remove the centre console, and then the radio, on a 2016 Citroen C4 Grand Pica…
How to replace the radio antenna of the Citroen C4 Grand Picasso
How to replace the radio antenna of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Below we will discover the steps that will allow us to disassemble and replace the car radio antenna of the Citroen C4 Grand Picasso. First, we get o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos