Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroen Jumpy

Model: Citroen Jumpy MK 2 - Years 2007-2016
Part: Warning light – error code

After performing an oil and filter change on this vehicle, you need to reset the service light that is illuminated on the dashboard. To do this, follow the instructions provided here, and you may also refer to the video. First, turn on the ignition without starting the engine, and locate the "check" button at the bottom of the dashboard on the right side of the speedometer. Press and hold it until the countdown of ten seconds is complete. At that point, the light will have been reset.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Citroen Jumpy 3
How to Reset the Service Light on the Citroen Jumpy 3
Citroen Jumpy (2016-2026 / MK 3) If you want to learn how to reset the service light on your third-generation Citroen Jumpy, just read the following guide carefully and apply the pro…
How to Reset the Service Light on a Citroen Jumpy
How to Reset the Service Light on a Citroen Jumpy
Citroen Jumpy (1994-2007 / MK 1) To reset the service light on a first-generation Citroen Jumpy, get inside the vehicle, turn the ignition on and off, and press the trip button while…
How to Reset the Service on a Citroen Jumpy Van?
How to Reset the Service on a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, see how to reset the service on a Citroen Jumpy van, an extremely simple and quick operation to perform only after completing all r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos