Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2010 Citroen Jumpy

Model: Citroen Jumpy MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the service light on a 2010 Citroen Jumpy by following a few simple steps. Before resetting the service light, perform vehicle maintenance, such as changing the engine oil and filters.

After completing the DIY service, get inside the vehicle and turn the key to position two without starting the engine; you will see the service spanner light illuminated. Keep the ignition off, then below the speedometer, there are two buttons; press the right button and turn the ignition back on. A countdown from 10 to 0 will start; hold the button until the countdown finishes, then release it. Now, turn off and restart the vehicle to check the reset.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2018 Citroen Jumpy
How to Reset the Service Light on the 2018 Citroen Jumpy
Citroen Jumpy (2016-2026 / MK 3) This video tutorial shows the procedure to reset the maintenance or service light on the 2018 Citroen Jumpy. To reset the light, first insert the key…
How to Reset the Service Light on the Citroen Jumpy 3
How to Reset the Service Light on the Citroen Jumpy 3
Citroen Jumpy (2016-2026 / MK 3) If you want to learn how to reset the service light on your third-generation Citroen Jumpy, just read the following guide carefully and apply the pro…
How to reset the service light on the Citroën Jumpy
How to reset the service light on the Citroën Jumpy
Citroen Jumpy (1994-2007 / MK 1) Today we will explain how to perform the service reset of the first generation Citroen Jumpy. Turn on the instrument panel and hold down the button o…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos