Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumpy
    4. : How to reset the service light on the 2018 Jumpy.

Citroen Jumpy - Video tutorial

Model: Citroen Jumpy MK 3 - Years 2016-2024
Part: Checks and maintenance
Operation: How to reset the service light on the 2018 Jumpy.

This video tutorial shows the procedure for resetting the maintenance or inspection light on the 2018 Citroen Jumpy. To reset the light, first insert the keys into the ignition and turn them to turn on the dashboard, but without starting the engine. Then, press the check button located in the center of the dashboard for 10 seconds, until the countdown appears. Once the countdown has started, release the button and wait for it to finish. Once it is finished, the reset will have been completed. By turning off and on the Jumpy's dashboard, the light will no longer be present.


Posted on 5 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Jumpy 2016-2025 - Where is the fuse diagram located, in the Citroen Jumpy 3? Read Answer
    • Jumpy 2016-2025 - How to reset the AdBlue warning light in the Citroen Jumpy? Read Answer
    • Jumpy 2016-2025 - What warning lights are there in the dashboard of the Citroen Jumpy van? Read Answer
    • Jumpy 2016-2025 - What are the warning lights of the Citroà «n Jumpy? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos