Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a 2018 Citroen Jumpy

Model: Citroen Jumpy MK 3 - Years 2016-2026
Part: Checks and maintenance

Today, thanks to this very useful tutorial, we will see how to reset the service light of a 2018 Citroen Jumpy. So let's start the reset procedure by pressing and holding down the left button of the speedometer together with the right button, and then turning on the vehicle's instrument panel without starting the engine as shown in the video. After doing this, a countdown of ten seconds will appear on the speedometer display, so continue to hold down both previous buttons until the time runs out to perform the reset and complete the job.

Posted on 27 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Citroen Jumpy 3
How to Reset the Service Light on the Citroen Jumpy 3
Citroen Jumpy (2016-2026 / MK 3) If you want to learn how to reset the service light on your third-generation Citroen Jumpy, just read the following guide carefully and apply the pro…
How to Reset the Service Light in a Citroen Jumpy Van?
How to Reset the Service Light in a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, you will see how to reset the service light in a Citroen Jumpy van, a very simple and quick operation that should only be done afte…
How to reset the service light on the Citroen Jumpy
How to reset the service light on the Citroen Jumpy
Citroen Jumpy (1994-2007 / MK 1) Today we will explain how to reset the service light related to the car service on a Citroen Jumpy vehicle produced from 1994 to 2007. To reset the l…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos