Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroen Jumpy

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

If you are unsure of the steps needed to correctly reset the service light on your Citroen Jumpy, this guide is all you need. Moreover, this method requires no diagnostic tools.

First, completely switch off the vehicle. Next, locate the "Check" button below the speedometer and hold it down.

At the same time, insert the key and turn on the ignition. Wait for the ten-second countdown to finish, then release the button.

The reset is complete, and you can turn off the ignition again.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroën Jumpy?
How to Reset the Service Light on a Citroën Jumpy?
Citroen Jumpy (2016-2026 / MK 3) To reset the Service light on a Citroën Jumpy, press and hold the button located in the central left part of the instrument panel, with the wrench ic…
How to Reset the Service Light on the Citroën Jumpy
How to Reset the Service Light on the Citroën Jumpy
Citroen Jumpy (2007-2016 / MK 2) To reset the Service light on the Citroën Jumpy, insert the key and turn it clockwise to switch on the instrument cluster. Once it is on, press and h…
How do you reset the Service light on the Citroën Jumpy?
How do you reset the Service light on the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) It will be possible to reset the Service light on the instrument panel of the Citroën Jumpy by holding down the button located on the central right s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos