Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3 Picasso
  6. : Where is the fuse for the onboard computer located in the Citroen C3 Picasso?

Citroen C3 Picasso - Video tutorial

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: -board computer
Operation: Where is the fuse for the onboard computer located in the Citroen C3 Picasso?

In case the onboard computer of our Citroen C3 Picasso suddenly stops working, we can first check the status of the corresponding fuse and, if necessary, replace it. As shown in this video, the fuse in question is located in the box inside the passenger compartment, in the lower left area of the dashboard. It is labeled with the code F8 and is 20A. If it is damaged, we always operate with the car turned off and remember to replace it with a replacement of the same specifications, otherwise we could cause serious damage to all connected devices.


Posted on 3 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos