Do it yourself
Frequently asked questions about cars and motorcycles

How to start the Citroën Jumper with immobiliser issues

Model: Citroen Jumper - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Onboard computer

See other generations:
Video tutorial

Today, we will explain how to start the engine of a Citroën Jumper despite issues with the immobiliser. To perform this operation, you need to turn on the ignition of the vehicle and after two seconds connect the OBD port to the diagnostic computer and press the brake pedal.

Wait for four PIN codes to appear on the display of the instrument cluster. Press the accelerator pedal and release it, alternating four times.

When the PIN code starts to flash, release the accelerator pedal and the brake pedal. Finally, restart the instrument cluster and disconnect the OBD port.


Posted on 16 November 2026 by ScegliAuto


Related tutorials

Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to reset the on-board computer in the Citroen Jumper van, a very simple and quick operation, for example, as an attempt to …
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Citroen Jumper (2014-2024 / MK 3) To reset the service light on the Citroen Jumper, get in the vehicle and turn on the ignition without starting the engine. Use the controls on the st…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos