Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Instrument Cluster on Citroen Jumper

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Instrument cluster

Unscrew the two screws that secure the speedometer on the sides. At this point, you can manually detach the upper cover (it requires some force). Once done, you will have freed the screws that secure the cluster from above: unscrew them. At this point, there is nothing left holding the cluster in place, so you can pull it out from its seat and disconnect the connector by moving the tab that holds it. At this stage, the instrument cluster with speedometer is completely disassembled. You can now replace the bulbs from behind or fit a new cluster if the old one is broken.

Updated on 7 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on a Citroën Jumper, turn on the ignition without starting the vehicle. Then, press the accelerator pedal and simultaneous…
How to reset the service light on the Citroën Jumper?
How to reset the service light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) To reset the service light on the Citroën Jumper, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press bot…
How to reset the Service light in the Citroën Jumper?
How to reset the Service light in the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) In the Citroën Jumper, to reset the Service light, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal whi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos