Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Citroen DS3 Front Bumper Installation

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Front bumper

In the event of a breakage or severe damage to the front bumper, it can be significantly advantageous, both economically and aesthetically, to replace the bumper rather than repair the original. It is indeed possible to purchase an aftermarket bumper that comes ready for painting, with the primer already applied. However, before proceeding with painting, it is advisable to carry out a test fit to check the alignment of the profiles and the gaps along the joint lines.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Remove the Front Bumper of the Citroen DS3
Guide to Remove the Front Bumper of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) This guide explains how to remove the front bumper of the Citroen DS3, following the instructions below. First, open the bonnet and unscrew the screw…
How to Remove the Front Bumper on the Citroen DS3
How to Remove the Front Bumper on the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In today's tutorial video, you will learn how to remove the front bumper and headlights of the first series Citroen DS3 in simple steps. First, open …
How to Replace the Timing Chain on a Citroën DS3
How to Replace the Timing Chain on a Citroën DS3
Citroen Ds3 (2010-2019 / MK 1) To replace the timing chain on a Citroën DS3, open the bonnet to access the left side of the engine bay. To facilitate access, it is advisable to rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos