Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Front bumper

In today's tutorial video, you will learn how to remove the front bumper and headlights of the first series Citroen DS3 in simple steps. First, open the bonnet and start by removing all the plastic clips found at the top of the bumper, as well as at the bottom; also remove the clips located on the wheel arches to gently detach the bumper from the sides, as shown in the video. At this point, disconnect the fog light electrical connectors to remove the bumper; unscrew the headlight screws using a socket spanner to take them out!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Remove the Front Bumper of the Citroen DS3
Guide to Remove the Front Bumper of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) This guide explains how to remove the front bumper of the Citroen DS3, following the instructions below. First, open the bonnet and unscrew the screw…
How to Replace the Timing Chain on a Citroën DS3
How to Replace the Timing Chain on a Citroën DS3
Citroen Ds3 (2010-2019 / MK 1) To replace the timing chain on a Citroën DS3, open the bonnet to access the left side of the engine bay. To facilitate access, it is advisable to rem…
Where is the OBD2 port located in the Citroen DS3?
Where is the OBD2 port located in the Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) To easily locate the OBD2 port inside your Citroen DS3, you need to carefully follow the steps described below and apply them step by step. First of …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos