Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from the Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

Today's instructions will illustrate how to remove and replace the cabin fan from the Citroen C3, following these simple steps. First, get inside the cabin and start by removing the plastic panel located next to the pedals; then you will find the cabin fan at the back, where you will unscrew its fixing screws and disconnect the electrical connector to remove the cabin fan, as shown in the video.

At this point, carry out the repair or replacement of the fan, applying the reverse procedure for reassembly!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Fan on a Citroen C3
How to Replace the Fan on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to replace the fan on a Citroen C3. Follow this guide to perform the disassembly. Remove the plastic cover under the glove compartment using a le…
How to Replace the Cabin Fan of a Citroen C3
How to Replace the Cabin Fan of a Citroen C3
Citroen C3 (2009-2016 / SC) Today, we will look at the instructions that will allow you to remove and replace the cabin fan of a Citroen C3 in simple steps. First, get inside th…
How to Replace the Cabin Fan of the Citroën C3?
How to Replace the Cabin Fan of the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the cabin fan of the Citroën C3, detach the plastic panel located on the left side of the footwell on the passenger side; once this panel …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos