Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan on a Citroen C3

Model: Citroen C3 FN, FC - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

Video tutorial

How to replace the fan on a Citroen C3. Follow this guide to perform the disassembly. Remove the plastic cover under the glove compartment using a lever; unscrew the cover where the fan is located with a screwdriver.

Disconnect the large power connector, then extract the fan from the cabin. Insert a new ventilation fan (connect the power connector).

Finally, refit the cover and tighten the screws. Check the correct assembly of the previously mounted parts and test their proper functioning.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan from the Citroen C3
Removing the Cabin Fan from the Citroen C3
Citroen C3 (2002-2009 / FN, FC) Today's instructions will illustrate how to remove and replace the cabin fan from the Citroen C3, following these simple steps. First, get inside the…
How to Replace the Cabin Fan of a Citroen C3
How to Replace the Cabin Fan of a Citroen C3
Citroen C3 (2009-2016 / SC) Today, we will look at the instructions that will allow you to remove and replace the cabin fan of a Citroen C3 in simple steps. First, get inside th…
How to Replace the Cabin Fan of the Citroën C3?
How to Replace the Cabin Fan of the Citroën C3?
Citroen C3 (2002-2009 / FN, FC) To replace the cabin fan of the Citroën C3, detach the plastic panel located on the left side of the footwell on the passenger side; once this panel …

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos