Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Citroen Berlingo?

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the Citroen Berlingo, a simple operation but requiring good manual skills. First of all, we open the engine hood, then disconnect the battery terminals and remove the battery. We then locate the starter motor, unscrew the upper fixing bolts and, taking all necessary safety measures, go under the vehicle. At this point, we disconnect the exhaust manifold, unscrew the additional bolts indicated, and remove the starter motor from its housing. To install the replacement, simply follow the reverse procedure.

Posted on 1 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Citroën Berlingo
How to Replace the Air Filter on a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the air filter on a Citroën Berlingo, open the bonnet to remove the plastic cover from the top of the engine block. Once this is removed, …
How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
When and How to Change the Timing Belt on a Citroen Berlingo
When and How to Change the Timing Belt on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below are the details on when and how to replace the timing belt on a Citroen Berlingo; for the 1.6 HDI engine, the manufacturer recommends replacing…

Other guides you may be interested in

    Frequently Asked Questions

    • Berlingo 1996-2013 - Where is the starter motor of the Citroen Berlingo located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos