Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Seat

In this guide we will see the main instructions useful for disassembling the rear seat and backrests of the Citroen C3. First, we open the rear doors of the car and start unscrewing the fixing screws we find on the bottom of the seat, removing the plastic caps first; we then use a socket wrench, as shown in the video. At this point, we remove the backrest by pulling it upwards, then unscrewing the screws at the base of the backrests to remove them if necessary, following the video tutorial until the end!

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Lower the Rear Seats of the Citroën C3?
How to Lower the Rear Seats of the Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To lower the rear seats of the Citroën C3, first lower the headrests completely so that when the seats are lowered, they do not hit the backs of the …
How do you remove the rear seats in the third series Citroen C3?
How do you remove the rear seats in the third series Citroen C3?
Citroen C3 (2016-2023 / SY, SX) If you need more loading capacity in your Citroen C3 third series, know that it is possible to remove the rear seats and recover additional space. Th…
Instructions for Removing the Rear Seats on Citroen C3 MK1
Instructions for Removing the Rear Seats on Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) In this guide, we will see the main instructions to remove the rear seats on the first series Citroen C3. First, access the rear by opening the doors…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos