Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit a Front Bumper on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Front bumper

See other generations:
Video tutorial

How do you fit a front bumper on a Dacia Sandero? This operation is not too complex if done methodically. First: open the bonnet by pulling the bonnet release lever and secure it with the prop rod. Unscrew the screws at the bottom of the bumper, then remove the screws on the sides of the wheel arch liners.

Once the bumper is free from any screws or pins, take it with your hands and pull it away from the bodywork (disconnect any power cables). Finally, fit the new bumper by following the disassembly steps.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2008-2012 / BS) It will be possible to install the tow hitch on the Dacia Sandero by first removing the rear bumper: to do this, you will need to open the rear hatch…
Dacia Sandero (2021-2026 / MK 3) In this video we see how to mount the phone holder on the 2021 Dacia Sandero: we need to go to the right side of the multimedia screen. In fact, on t…
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …

Other guides you may be interested in

Where is the Starter Motor Fuse Located in the Renault Scenic?

In this video, you can see where the starter motor fuse is located in the Renault Megane, which is the first component to check in case of sudden malfunction. As shown, it is found in the fuse box within the engine compartment, to your right when facing the vehicle. To access it, first remove the plastic cover and then lift the fuse box. The fuse in question is located on the lower side, between the two connectors, and is rated at 25A. If faulty, ensure you use a replacement with the same specifications.

Watch the video!


by ScegliAuto

More videos