Do it yourself
Frequently asked questions about cars and motorcycles

How do you install the tow hook on the Dacia Sandero?

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

It will be possible to install the tow hitch on the Dacia Sandero by first removing the rear bumper: to do this, you will need to open the rear hatch and loosen the screws located next to the light clusters. Once these have been released from their position, you can loosen the screws in their housings that secure the bumper: you will also need to loosen those at the bottom and inside the wheel arches.

After removing the bumper, you can install the tow hitch by securing it with the screws and checking that everything works properly.


Posted on 29 November 2025 by ScegliAuto


Related tutorials

Dacia Sandero (2012-2020 / B8) Below are the main instructions on how to install the towing hook on the Dacia Sandero. First of all, let's move to the back of the car and start by …
Dacia Sandero (2012-2020 / B8) Below are the main instructions for installing a tow bar on the Dacia Sandero. First, open the rear boot lid and start unscrewing all the fixing scre…
Dacia Sandero (2012-2020 / B8) To install the armrest on a Dacia Sandero, first remove the trim around the handbrake lever: to do this, loosen the screw located at the back of the …

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos