Do it yourself
Frequently asked questions about cars and motorcycles

How to Install a Tow Bar on the Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020

Below are the main instructions for installing a tow bar on the Dacia Sandero. First, open the rear boot lid and start unscrewing all the fixing screws of the rear bumper using a spanner or Torx screwdriver. Then remove the rear light and proceed with the installation of the wiring harness. At this point, fix the tow bar to the chassis using the appropriate bolts provided in the kit. Finally, reassemble the rear bumper and light, following the video tutorial to the end!

Posted on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2008-2012 / BS) It will be possible to install the tow hitch on the Dacia Sandero by first removing the rear bumper: to do this, you will need to open the rear hatch…
Dacia Sandero (2012-2020 / B8) Below are the main instructions on how to install the towing hook on the Dacia Sandero. First of all, let's move to the back of the car and start by …
Dacia Sandero (2021-2026 / MK 3) Below we will discover the instructions that will allow us to set the time on the central display of the Dacia Sandero. First, we get on board the ca…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos