Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the tow hook on the Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020

Below are the main instructions on how to install the towing hook on the Dacia Sandero. First of all, let's move to the back of the car and start by removing the rear bumper, unscrewing the screws found at the bottom and on the wheel arches; then loosen the screws of the catalytic converter brackets, lowering it slightly to allow the installation of the towing hook (approved for our car), as shown in the video. Once the towing hook is properly fixed, it will be possible to reassemble everything, following the video tutorial to the end!

Posted on 11 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you install the tow hook on the Dacia Sandero?
How do you install the tow hook on the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) It will be possible to install the tow hitch on the Dacia Sandero by first removing the rear bumper: to do this, you will need to open the rear hatch…
How to Install a Tow Bar on the Dacia Sandero
How to Install a Tow Bar on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Below are the main instructions for installing a tow bar on the Dacia Sandero. First, open the rear boot lid and start unscrewing all the fixing scre…
How do you install the armrest of the Dacia Sandero?
How do you install the armrest of the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In order to install the armrest of the Dacia Sandero, you must first remove the trim around the handbrake lever: to do this, you will need to loosen …

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos