Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper on the Dacia Sandero Stepway?

Model: Dacia Sandero BS - Years 2008-2012
Part: Rear bumper

Great video available here, also containing verbal description, to help you disassemble the rear bumper of the Dacia Sandero on your own, following the same steps as the Dacia Sandero Stepway. It starts with removing the rear lights, unscrewing the fixing pins and pulling them forcefully outwards to detach them. Then proceed with removing the pins of the same bumper at the top and bottom, before continuing with the wheel arches on both sides, always rear, before finally releasing the bumper from its seat. It is advisable to have bodywork levers and a swivel key, like the ones in the photo.

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to Replace the Wiper Blades on the Dacia Sandero Stepway 2
How to Replace the Wiper Blades on the Dacia Sandero Stepway 2
Dacia Sandero (2012-2020 / B8) This video demonstrates how to remove and replace the front wiper blades on the Dacia Sandero Stepway second generation in simple steps. First, lift …
How to Remove the Rear Bumper from a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today, you will learn how to remove the rear bumper from a Dacia Sandero. Open the boot and using a Torx T30 key, unscrew the upper screws of the bum…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos