How to Remove the Rear Bumper from a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Rear bumper

Today, you will learn how to remove the rear bumper from a Dacia Sandero. Open the boot and using a Torx T30 key, unscrew the upper screws of the bumper visible along the inner edge. Unscrew the plastic nuts to remove the cover and detach the rear lights, being careful not to pull too hard to avoid damaging the connector. Remove the plastic clips under the lights and turn the wheels inward to slightly detach the wheel arch and unscrew the Torx screws holding the bumper corners. Using a Torx key, unscrew the screws under the bumper and using a 10 mm socket, remove the bolts. Grip one side and pull the bumper outward. Before completely removing it, check for any parking sensor and the bulb for the wide lights.

Posted on 23 April 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Rear Bumper - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Remove the Rear Bumper from a Dacia Sandero

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos