Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the windshield wiper brush of the Dacia Sandero

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In the following article, we will illustrate the procedure for replacing the windshield wiper blades of the Dacia Sandero. No tools are needed for this operation.

To replace the windshield wiper blades, first lift the wiper arms. After lifting them, apply slight pressure on the locking tab and then push the wiper upwards to remove it. Once the old blade is removed, insert the new blade making sure the direction is correct, this way the operation will be correct and when inserting the blade into the appropriate housing it will fit in place.

Now the procedure will be complete.


Posted on 31 May 2025 by ScegliAuto


Related tutorials

Dacia Sandero (2008-2012 / BS) To replace the rear wiper blade on the Dacia Sandero, lift the blade so that it is no longer in contact with the rear screen: once the blade is lifte…
Dacia Sandero (2008-2012 / BS) In this tutorial, see how to replace the rear wiper on a Dacia Sandero, a very simple and quick operation. First, ensure the wiper is in the rest pos…
Dacia Sandero (2008-2012 / BS) The following steps will allow us to disassemble and replace the front windshield wipers of the Dacia Sandero. First, let's move to the front of the …

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos