Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the partial mileage counter of the Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part: Checks and maintenance

The information provided in this guide will show us how to reset the partial mileage counter (trip) of the Dacia Sandero. First, we get into the car and start the instrument panel; then we use the steering wheel controls, pressing the arrow button until we reach the trip option, as shown in the video. At this point, we hold down the reset button to reset the partial mileage counter; it is possible to reset the counter at any time, useful for keeping track of the miles during a specific journey.

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) In this video, we will see how to reset the partial mileage on the instrument cluster of a second-generation Dacia Sandero, as well as on a fourth-ge…
Dacia Sandero (2021-2026 / MK 3) Shortly we will see the instructions that will allow us to reset the regular maintenance warning of the Dacia Sandero. First of all, we get on board …
Dacia Sandero (2012-2020 / B8) Below, we will discover how to reset the maintenance warning (service) light on a Dacia Sandero. First, get in the vehicle and turn on the instrument…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos