Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulbs on a Dacia Stepway

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlamp bulbs, proceed as follows. Open the bonnet and at the rear of the headlamp (towards the bulb) there is a black rubber cap; gently pull it outwards to remove it. You now have access to the bulb, which needs to be released by unhooking the retaining clip.

The bulb is connected to the bulb holder, so disconnect it and replace it with the new one; then reposition the bulb inside the headlamp and secure the bulb holder by locking it with its tab. Now you can close everything by inserting the black rubber cap, ensuring it fits snugly against the headlamp.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to adjust the headlights in the Dacia Sandero Stepway?
How to adjust the headlights in the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) In this tutorial, we can see how to adjust the front headlights in the Dacia Sandero Stepway, an extremely simple and quick operation. First of all, …
How do you adjust the height of the headlights on a Dacia Sandero Stepway?
How do you adjust the height of the headlights on a Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) With the tutorial presented here, first of all we understand how to replace one of the bulbs in the front headlight of the Dacia Sandero Stepway, the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos