Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Dacia Dokker

Model: Dacia Dokker MK 1 - Years 2013-2024
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in a Dacia Dokker, a very simple and quick operation. First, go to the passenger side, then remove the lower cover of the glove compartment by extracting all the indicated plastic rivets. Next, locate the long rectangular flap on the left wall, open it by unlocking the two clips, and remove the old filter. At this point, simply clean the housing of any dirt residue, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Dacia Dokker
How to Replace the Cabin Filter on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) In the following video, you will see how to remove and replace the cabin filter on a Dacia Dokker. Like other car models, this is a very simple job t…
How to replace the cabin air filter of the Dacia Dokker
How to replace the cabin air filter of the Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) In the following guide, we will help you complete the replacement of the cabin air filter of your Dacia Dokker correctly and safely. First, purchase …
How to Replace the Front Headlight Bulb in the Dacia Dokker?
How to Replace the Front Headlight Bulb in the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) To replace the front headlight bulb in the Dacia Dokker, open the bonnet to access the components located inside the engine compartment: here you wil…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos