Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Dokker
  6. : How to replace the cabin filter on Dacia Dokker

Dacia Dokker - Video tutorial

Model: Dacia Dokker MK 1 - Years 2013-2023
Part: Cabin air filter
Operation: How to replace the cabin filter on Dacia Dokker

In the following video we will see how to remove and replace the cabin filter of the Dacia Dokker. As with other car models, this is a very simple job which does not take much time. First we need to identify the position of the filter. It is located under the dashboard, which is why to remove it, simply position yourself on the passenger side. First you need to remove the cover located in the lower part of the passenger compartment. Subsequently, with a slight pressure, the filter is taken and carefully removed. At this point, you can insert the new filter and reposition the cover as it was before.


Posted on 27 July 2022 by ScegliAuto



How to reset the oil service in the Dacia Dokker?
Dacia Dokker (2013-2023 / MK 1) In this tutorial, we can see how to reset the oil service in the Dacia Dokker, an extremely simple and quick operation. Before doing this, we must ha
How to disassemble the spark plugs of a Dacia Dokker?
Dacia Dokker (2013-2023 / MK 1) Before starting, we will have to go to open the front hood of our Dacia Dokker. So let's start by unscrewing and removing the bolts that secure the a
How to reset the tire warning light on the Dacia Dokker?
Dacia Dokker (2013-2023 / MK 1) In this tutorial, we can see how to reset the tire indicator in the Dacia Dokker, an extremely simple and quick operation, to be performed only after

    Frequently Asked Questions

    • Dokker 2013-2023 - Where is the cabin air filter located on the Dacia Dokker? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos