Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Reattaching the Armrest in the Dacia Duster Prestige

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

See other generations:
Video tutorial

To remove the driver’s armrest in the Dacia Duster, start by removing the cap using a small screwdriver from inside the knob on the armrest pivot. Remove the knob itself.

Unclip the elastic of the seat cover, then open the latch and detach the plastic hook of the cover. At this point, you can push the armrest pivot out with a suitable tool and remove the armrest.

Now, using a drill, you can remove the reject (as shown in the video images). Turn the lumbar mechanism in the direction indicated in the images and slide it out. Also, slide out the cable.

Now, cut the pivot flush with the mechanism and 50 mm from the other end. After finishing, using the drill, the inside of the pivot, cut a suitable "Fisher" plug, 75 mm in length, insert it into the pivot hole, and insert the previously cut pivot into it. Insert a screw, approximately 70 mm in length, into the plug and tighten it well.

Remove the cover and re-screw the screws without it. Finally, reassemble everything following the same operations seen but in reverse order.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Armrest of the Dacia Duster Seat?
How to Replace the Armrest of the Dacia Duster Seat?
Dacia Duster (2017-2024 / HM, MK 2) To replace the armrest of the Dacia Duster seat, first detach the cover located at the base of the armrest using a tool like a screwdriver. Once this…
How to Remove the Armrest on the Dacia Duster
How to Remove the Armrest on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Today's information will show you the steps to remove and replace the driver's seat armrest on the Dacia Duster. First, access the rear of the vehicl…
How to install the armrest on the Dacia Duster
How to install the armrest on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below we will see the instructions that will allow us to install the armrest on the driver's seat of the Dacia Duster. First of all, we get on board …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos