Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dacia Sandero door panel

Model: Dacia Sandero BS - Years 2008-2012
Part: Door trim panel

In this video tutorial we will see how to remove the door panel of a 2013 Dacia Sandero. First we open the door and remove the case protection, unhooking it by hand or using a plastic lever. Then we unscrew the torx screws on the sides of the case: remove the case by disconnecting the electrical connector on the back. At this point we unscrew the screw of the handle and remove the window lifter button by levering it: disconnect its electrical connector. We disassemble the handle and we go to unhook our panel by levering the sides!

Posted on 21 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of a Dacia Sandero?
How to remove the door panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before starting, we will have to open the door of our Dacia Sandero. So let's start by disengaging and removing the window lifter lever, simply by ex…
How to Remove the Door Panel on a Dacia Sandero
How to Remove the Door Panel on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How do you remove the right rear door panel on a Dacia Sandero? Follow these steps. Before starting the disassembly, disconnect the battery terminals…
Disassembly of the door panel of the Dacia Sandero
Disassembly of the door panel of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today we will discover the process of disassembling and replacing the front door panel of the Dacia Sandero. First, we open the door and begin to rem…

How to Remove the Front Bumper on a Renault Clio

Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet release lever and secure it. Unscrew the fastening pins of the upper cover of the front bumper using a socket wrench. Unscrew the screws on the front bumper, unscrew the screws under the splash guard and under the bumper. Remove the bumper from the body of the vehicle, unscrew the pins located at the side of the headlight (if you need to replace it). Fit the new bumper with the associated pins onto the vehicle, following the steps taken during disassembly.

Watch the video!


by ScegliAuto

More videos