Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Tire pressure warning light

If the tyre pressure monitoring system (TPMS) warning light remains illuminated on the dashboard, it is important to first check the correct inflation of the tyres to rule out any punctures. Once you have completed the check, reset the system to turn off the warning light: switch on the ignition and use the button located on the wiper control stalk to scroll through the menu options until you see the SET TP function (which appears just after the outside temperature). Press and hold to reset and turn off the light.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on Dacia Sandero
How to Reset the Tyre Pressure Warning Light on Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) This brief video tutorial shows how to reset the tyre pressure warning light on a third-generation Dacia Sandero. Before performing this operation, e…
How do you reset the tire pressure warning light on the Dacia Sandero?
How do you reset the tire pressure warning light on the Dacia Sandero?
Dacia Sandero (2021-2026 / MK 3) The tire pressure warning light on the Dacia Sandero can be reset by inflating the tires to the recommended pressure value: this value will be indica…
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos