Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on the Dacia Sandero StepWay

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Windshield wipers

See other generations:
Video tutorial

This video shows how to replace the wipers on the Dacia Sandero StepWay. The procedure is simple and takes little time to perform, and it does not require any tools. To replace the wipers on the Sandero, press the button located in the centre of the wiper arm, which is the wiper release lever; once pressed, pull it out carefully.

After removing the old wiper, lift the wiper arm, then insert the new wiper blade into position so that it locks in place and does not detach during use. The procedure is complete, and the wiper blade has been replaced.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to replace the windshield wiper of the Dacia Sandero Stepway
How to replace the windshield wiper of the Dacia Sandero Stepway
Dacia Sandero (2021-2026 / MK 3) If you are looking for a guide to help you complete the replacement of one of the wipers of your Dacia Sandero Stepway Mk3, then all you have to do i…
How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to replace the wipers on a Dacia Sandero Stepway
How to replace the wipers on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) To replace the wipers on a Dacia Sandero Stepway, lift the wiper arm away from the windscreen until it is in the working position. Identify the attac…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos