Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel on Daihatsu Terios

Model: Daihatsu Terios J200, MK 2, F700 - Years 2006-2017
Part: Door trim panel

Using a small flathead screwdriver or a plastic wedge, remove the screw cover located in the door pocket, behind the window switch buttons, and unscrew the underlying screw. Similarly, remove the screw cover near the opening handle and unscrew the other now-exposed screw. Pry with the screwdriver or lever at the junction lines of the central handle until you can extract it. Unscrew the two underlying screws and remove the internal plastic of the handle. Extract the window switch panel and disconnect its connector. Pry all around the panel to remove it.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Daihatsu Terios (1997-2005 / J100, MK 1, F500) In this video, you will see how to remove the front door panel of a Daihatsu Terios J2. First, remove the door armrest by prising it off with a screw…
Daihatsu Terios (1997-2005 / J100, MK 1, F500) Before you begin, sit in the driver's seat of your Daihatsu Terios. Start by activating the instrument cluster by turning the key in the ignition bar…
Daihatsu Terios (1997-2005 / J100, MK 1, F500) Before you can begin, open the tailgate of your Daihatsu Terios. Start by unscrewing and removing the bolts that secure the rear light to its housing…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos