Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cabin Heater Radiator of the Datsun Go

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Heater core

Video tutorial

Below is the guide and instructions to help you remove and replace the cabin heater radiator of the Datsun Go. First, get inside the vehicle on the driver's side and start removing the panel behind the pedal assembly; then disconnect the hoses from the radiator fluid circuit, draining it into a container.

Next, loosen the mounting screws using a Phillips screwdriver; then remove the internal radiator and replace it with the new one, applying the reverse procedure for reassembly!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Spark Plugs on the Datsun Go
Guide to Replacing the Spark Plugs on the Datsun Go
Datsun Go (2013-2022 / MK 1) In this guide, you will find the main instructions on how to remove and replace the spark plugs on the Datsun Go. First, open the hood of your car an…
How to Replace the Cabin Air Filter in a Datsun Go
How to Replace the Cabin Air Filter in a Datsun Go
Datsun Go (2013-2022 / MK 1) Replacing the cabin air filter in your Datsun Go is a very important task that you can easily do on your own at any time. Here’s how to do it. First,…
How to Replace the Cabin Filter on a Datsun Go?
How to Replace the Cabin Filter on a Datsun Go?
Datsun Go (2013-2022 / MK 1) To replace the cabin filter on a Datsun Go, access the side of the footwell on the passenger side to detach the corresponding plastic cover. Under th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos