Do it yourself
Frequently asked questions about cars and motorcycles

How to Top Up the Coolant in the Datsun Redi Go

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Radiator

Video tutorial

If the reservoir containing the radiator coolant has a low or nonexistent fluid level, you need to refill it as soon as possible. To complete the entire procedure, you will only need a suitable syringe.

First, ensure that the engine is sufficiently cool for safety reasons. Fully raise the hood and locate the coolant reservoir at the front.

Remove the small rubber hose and proceed to pour the new coolant inside. Fill the reservoir completely, and finally, reconnect the rubber hose.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Datsun Go (2013-2022 / MK 1) In today's video, you will see how to completely remove the dashboard of the Datsun Redi Go. First, remove the center steering wheel cushion. Then, l…
Datsun Go (2013-2022 / MK 1) This guide shows how to replace the battery on the Datsun Go, including the Go+ and Redi Go models. First, secure the vehicle and open the hood using…
Datsun Go (2013-2022 / MK 1) To replace the air filter on the vehicle, proceed as follows: Open the hood; roughly in the center of the engine compartment, at the front, is the bo…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos