Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Datsun Redi Go

Model: Datsun Go MK 1 - Years 2013-2022
Part: Instrument cluster

In today's video, you will see how to completely remove the dashboard of the Datsun Redi Go. First, remove the center steering wheel cushion. Then, loosen the steering column by working on the central bolt; next, remove the screws underneath. Now, move to the center console and using a sharp object, like a flathead screwdriver, proceed to remove the climate control trim; you can similarly remove the car radio. Once done, disconnect the power connectors located at the back, and you're finished. Operation complete.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Datsun Redi Go
How to Replace the Battery on a Datsun Redi Go
Datsun Go (2013-2022 / MK 1) This guide shows how to replace the battery on the Datsun Go, including the Go+ and Redi Go models. First, secure the vehicle and open the hood using…
How to Top Up the Coolant in the Datsun Redi Go
How to Top Up the Coolant in the Datsun Redi Go
Datsun Go (2013-2022 / MK 1) If the reservoir containing the radiator coolant has a low or nonexistent fluid level, you need to refill it as soon as possible. To complete the ent…
How to Replace the Air Filter on the Datsun Redi Go
How to Replace the Air Filter on the Datsun Redi Go
Datsun Go (2013-2022 / MK 1) To replace the air filter on the vehicle, proceed as follows: Open the hood; roughly in the center of the engine compartment, at the front, is the bo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos