Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on the Datsun Redi Go

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

Video tutorial

To replace the air filter on the vehicle, proceed as follows: Open the hood; roughly in the center of the engine compartment, at the front, is the box containing the filter. Unclip the cover clips and remove the cover; inside the compartment is the filter that can be removed.

Then take the new filter (check that the model is suitable for your vehicle type, see the owner's manual) and place it in the housing, then reposition the cover and close the two locking clips.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

Datsun Go (2013-2022 / MK 1) In today's video, you will see how to completely remove the dashboard of the Datsun Redi Go. First, remove the center steering wheel cushion. Then, l…
Datsun Go (2013-2022 / MK 1) This guide shows how to replace the battery on the Datsun Go, including the Go+ and Redi Go models. First, secure the vehicle and open the hood using…
Datsun Go (2013-2022 / MK 1) Replacing the cabin air filter in your Datsun Go is a very important task that you can easily do on your own at any time. Here’s how to do it. First,…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos